A DIY Guide to Bathroom Renovations in Sydney - Qomicis
824
post-template-default,single,single-post,postid-824,single-format-standard,ajax_fade,page_not_loaded,,select-theme-ver-4.6,menu-animation-underline,wpb-js-composer js-comp-ver-5.5.5,vc_responsive
bathroom renovations in Sydney

A DIY Guide to Bathroom Renovations in Sydney

Bathroom renovations are not an everyday task that we can do with our eyes closed. This renovation is something that you must have thought through. Let’s say you’re trying to add some spice to your bathroom, or you’re tired of the old configuration it used to have. You could also be moving into a new house and want to switch things up before moving in. 

As far as this article is concerned, we will be taking you through some steps you’d need for successful bathroom renovations in Sydney. We will try to cover everything from plumbing to electrical fittings and in between. Let’s get to it. 

  1. Ideation And Planning 

This is the first and most crucial step to take when taking up bathroom renovations in Sydney. They say failure to plan is planning to fail. That’s very true here. 

Whether you work alone or in a group, you have to plan. Ideate what you want the finished look of the room to be. Map out all the things you need to do and group them separately. 

That would be more like putting everything that concerns plumbing in one group.  

Additionally, if, for some reason, you’re still a bit unsure about this planning phase, you can always call on a bathroom renovations expert to guide you. You can call on an interior design company or a plumbing and kitchen group.

  1. Demolishing in bathroom renovations

We know that some of the old stuff has to go before you can build new stuff. From the layout of your already existing plan in step one, you should know what needs to be broken down.

Before doing this, ensure you have disconnected the electrical and water supply systems, so you don’t damage them too. 

Also, try to keep the demolition as minimal as possible. Don’t go playing Wreck-it Ralph in bathrooms.

  1. Electrical Installations

Most electrical stuff nowadays is done in conduit style. That means all the ugly wiring is done on the wall’s insides. So, this would probably be the first thing you want to work on. We believe it would be a little simpler if you had a bathroom renovations Sydney expert. 

  1. Plumbing Adjustments And Fittings for bathroom renovations

It will help if you put most of your bathroom adjustments and fittings in place at this point. We’re talking more of the wall-fitted things like your shower head and controls, sinks, and even your toilet bowl. 

You could picture this as anything that would need to be cemented in place. Sometimes, we advise you to place the fittings in their respective positions to get an idea of what they’d look like when finished. 

This gives you room to make changes if you don’t like what you see. This can then be the basis to fit in all the plumbing and water systems you need so that the aesthetic outlook is not affected.

  1. Finishes And Rebuild

When everything seems to be in place, the next step is rebuilding and adding finishing touches to your bathroom renovations in Sydney. Things like tiling the walls, installing fans, and other devices. Stuff like shower curtains and sliding glass doors can be fitted at this point and painting if there’s a need for it. 

The whole process of renovating might take a few days and even come with certain complexities. We advise that when you’re in doubt, you should contact a bathroom renovations expert to aid your project. We hope this article has helped you too. Thank you. 

No Comments

Sorry, the comment form is closed at this time.